Associate Agencies

paldi, Ahmedabad, Gujarat GST No. 24AACHD9557R1ZM

Call 08048972066 69% Response Rate

Send Email

Home
»
Product Range
»
Plastic and Pvc Pipe Testing Equipment

Plastic and Pvc Pipe Testing Equipment

We are offering a wide range of Plastic and Pvc Pipe Testing Equipment to our valued clients. We are providing different number of tester. All are tester are best in quality on effective cost.

Tensile Testing Machine For Plastic

Tensile Testing Machine For Plastic

Product Price: Rs 65,000 / PieceGet Best Price

Product Details:

Display Type	Digital
Frequency	50 Hz
Material	Plastics
Capacity	500kg / 1000 kg

We are one of the highly acknowledged organizations engaged in manufacturing and supplying of tensile testing machine for plastic, which are used in various industries for determining the tensile strength and capacity till the extent they resist. Further, our range of instruments is fabricated using high grade raw material that gives strength and high durability to the instruments. Additionally, our clients can avail these machines in various customizations as per their requirements at highly cost effective price in market.

Get Best QuoteRequest A Callback

Abrasion Tester For Plastic Sheet- Taber Type

Abrasion Tester For Plastic Sheet- Taber Type

Product Price: Rs 75,000 / PieceGet Best Price

Product Details:

Brand	Tabber
Phase	Single
Frequency	50 Hz
Voltage	220 - 380 V
Rotary Speed	70 r/min

We are the leading manufacturer of the abrasion tester for plastic sheet- taber type, which is designed to determine the wear and durability of paper and board, ceramics, plastic, textile, rubber, flooring, and painted lacquered and electroplated surfaces. Additionally, these instruments are highly applicable in various areas such as testing equipment, paper industry and packaging industries. Moreover, these instruments are offered by us at very lower prices as compared to others in market.

Get Best QuoteRequest A Callback

Spread of Flame Tester

Spread of Flame Tester

Product Price: Rs 60,000 / PieceGet Best Price

Product Details:

Display Type	Digital
Material	SS
Size	1650 x 810 x 1985 mm
Voltage	220 V
Frequency	60 Hz

We are offering our clients with spread of flame tester as per uic 564 or appendix 11, which are known for its optimum performance and high durability. These instruments are used to determine flame spread or surface burning characteristics rating, which is material's propensity to burn rapidly and spread flames. Additionally, our clients can avail these instruments in various modifications as per clients’ demands. Further, we offer these instruments at virtually unmatched prices in the market.

Get Best QuoteRequest A Callback

Environmental Stress Cracking Apparatus

Environmental Stress Cracking Apparatus

Product Price: Rs 45,000 / PieceGet Best Price

Product Details:

Phase	3
Material	SS
Voltage	220-440 V
Current	10 Amp
Frequency	50-60 Hz
Power Source	Electric

Our clients can avail from us superior quality environmental stress cracking apparatus, which are used to analyze and determine tensile strength and capacity till the extent they resist. Further, our range of devices are fabricated using high grade raw material that makes entire range highly durable as well as resistant to different working conditions. Also, these instruments are highly appreciated for its rigid construction, high efficiency and great durability. We offer these instruments at highly affordable prices in market.

Get Best QuoteRequest A Callback

Oxygen Index Apparatus

Oxygen Index Apparatus

Product Price: Rs 15,000 / PieceGet Best Price

Product Details:

Model	YZS 100 A
Response time	300 ms
Accuracy	+/-0.2%
Resolution	0.10%

Backed with rich industrial experience, we are offering our clients with oxygen index apparatus, which finds extensive applications in oxygen and nitrogen measurement in addition to rotameter. Further, this apparatus shows the direct oxygen percentage that can be indicated digitally in the oxygen and nitrogen mixture, with the help of oxygen meter. Moreover, our clients can avail these instruments in various technical specifications as per clients’ demands at very affordable price.

Get Best QuoteRequest A Callback

COF Tester For Plastic Film

COF Tester For Plastic Film

Product Price: Rs 14,000 / PieceGet Best Price

Product Details:

Accuracy	0.5% FS
Test Speed	150 mm/min
Stroke	130 mm
Capacity Range	0 ~ 5 N

We deal in manufacturing and supplying of COF tester for plastic film, which are used in diverse industries for measurement of the coefficient of friction for plastic film. Moreover, our line of coefficient of friction test instruments can be configured to suit individual needs. Additionally, each instrument is designed for testing films, paper, and foils and our instruments are highly acknowledged as they offer ease of use and maintenance. We offer our clients these instruments at highly cost effective prices in market.

Get Best QuoteRequest A Callback

Smoke Visibility Tester

Smoke Visibility Tester

Product Price: Rs 1.3 Lakh / PieceGet Best Price

Product Details:

Material	MS
Rota meter	30 LPM
Voltage	220
Power Source	Electric

Royal Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permit to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. Left-hand side of the chamber has a hole, an exhaust fan fitted to the left hand side hole. Right hand side have hole which permit to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which have a clear glass window on the door. There are shutters on the left hand side and the right hand side hole of the chamber.

The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is a aluminium silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mount on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply the any gas with the instrument.

Get Best QuoteRequest A Callback

Smoke Density Tester

Smoke Density Tester

Get Latest Price

Product Details:

Power Source	Electric
Voltage	220 V
Door Diameter	70 mm
Accuracy	+-3%

Royal smoke density chamber is constructed using 14 gage aluminum box, which is hinged a heat resistant glass glazed door. This box is mounted on the base which houses the controls. Dependent upon the materials tested, the metal may require protection from corrosion. The chamber is sealed except for 25 by 30mm (1by 9in.) openings on the four sides of the bottom of the chamber. A liters/min specified capacity blower is mounted on one side of the chamber. The inlet duct to the bowler is equipped with a close fitting damper. The outlet of the bowler will be connected through a duct to the laboratory exhaust system. The two sides adjacent to the smoke tight glazed areas entered 480mm (19/4 in.) above the base. At these locations and out side the chamber, boxes containing the optical equipment and additional controls are attached. A removable white plastic plate is attached to the back of the chamber. There is a clear area centered above the bottom of the chamber. Through which is seen an illuminated white on red exit sign. The white back ground permits observations of the flame, smoke and burning characteristics of the materials. The viewing of the exit sign helps to correlate visibility and measured values. The specimen holder is supported on a square gage. Stainless steel wire cloth above the base and equidistant from all sides of the chamber. This screen is lying in a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod similar bezel is located below and it is support a square of asbestos paper which catches any particles that may drip from the specimen during the test. By rotating the specimen holder rod, the burning specimen can be quenched in a shallow pan of water positioned below the specimen holder.The specimen is ignited by a propane flame from a burner operating at a specified pressure. The fuel is mixed with air which has been propelled through the burner by the venturi effect of the propane as it passes from small orifice. The burner is designed to provide adequate outside air. The burner is capable of being positioned quickly under the specimen so that the exit of the burner falls on a line passing through a point 8mm above the base at one corner of the chamber extending diagonally across the chamber and sloping up wards at 45 deg with the base. There is a control panel which control and indicate the supply of gas. Lux of light measurement system of the mounted light source also mounted in the instrument. There is a digital timer mounted in the instrument to indicate the time.

Get Best QuoteRequest A Callback

Melting Point Apparatus Analogue Capillary Tube Type

Melting Point Apparatus Analogue Capillary Tube Type

Product Price: Rs 8,190 / PieceGet Best Price

Product Details:

Brand	Stuart
Temp. Range	50 to 250
Voltage	230 V
Heating Rate	1 to 10 degree C

Backed with the support of team of highly experienced people, we are engaged in manufacturing of melting point apparatus analogue capillary tube type, which are highly acclaimed worldwide for its greater efficiency. Moreover, these instruments are simple to operate, durable with longer service life. Additionally, our clients can avail these instruments in various specifications as per clients’ demands. Also, our clients can avail these devices at leading market prices.

Get Best QuoteRequest A Callback

Dart Impact Tester For Plastic Bottle

Dart Impact Tester For Plastic Bottle

Product Price: Rs 26,000 / PieceGet Best Price

Product Details:

Voltage	220 V
Specimen Size	150 mm x 150 mm
Pressure of Gas Supply	0.6 MPa
Dimension	22" x 20" x 85"

Dart impact tester for plastic bottle.

Get Best QuoteRequest A Callback

Impact Testers

Impact Testers

Product Price: Rs 26,000 / PieceGet Best Price

Product Details:

Voltage (V)	220-380
Phase	Single
Accuracy (%)	0.1 g
Pressure of Gas Supply	0.6 MPa

Our clients can avail from us impact testers product range, which are used to determine the absorbed impact energy and resistance to breakage of plastic specimens. Moreover, our range of products is highly appreciated for its innovative mechanical design, rugged construction and high durability which make these accurate impact testers highly desirable among the clients. Further, our range of instruments are competitively priced and can be availed in various technical specifications as per clients demands.

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

View Complete Range >

Contact Us

Thank youYour Enquiry has been sent successfully.

© Associate Agencies. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.

X